The following is a list of useful terms to use when researching additional Residential & Community Facilities information on each of the topics discussed:
The design and construction of buildings for accessibility and use by persons with physical disabilities, complying with the Federal ADA Standards; US Housing and Urban Development (HUD); BC Chapter 11, BC Appendices E, N and P; and/or ICC/ANSI A117.1.
An alteration is the addition, change of use, or occupancy of a building or structure in existence, and always results in a new or amended Certificate of Occupancy. Work may involve an enlargement, reduction in size of the building, or a major change to the building egress, zoning use group, and/or building code occupancy use.
The installation, modification, or upgrade of existing building systems including plumbing, boiler, sprinkler, standpipe, fire alarm, HVAC, and fire suppression systems. If such repairs are part of the project, they must be included in the scope of work.
A new or amended Certificate of Occupancy is issued for a building on completion of a project involving a change in occupancy or use, or when there are other changes that impact the existing Certificate of Occupancy. For example, where an existing building is vertically enlarged by a complete story, or if the use of a building is changed from commercial to residential, a new or amended CO would be required. Reference AC 28-118.3 for more information.
The following may also be issued:
Per the Zoning Resolution, Commercial, as applied to building use, is any retail, service or office use. Commercial can also describe the type of zoning district.
As per the Zoning Resolution, a community facility may be located in residential areas to serve, on a not-for-profit basis, the educational, emotional, mental health needs, or other similar essential services of its residents.
Per the Zoning Resolution, a conversion is a change of use. A use is any purpose for which a building, structure, or open tract of land is designed, arranged maintained or occupied.
Per the Zoning Resolution, an enlargement is an addition to the floor area of an existing building or zoning lot, or an expansion of a use to an area not previously used for such purpose.
Per the Building Code, an enlargement is any addition of gross floor area to a building.
Include changes to floor layouts that add, relocate, remodel, enlarge or reduce the size of interior rooms while maintaining the same building envelope.
Windows of a building exterior wall located on the side or rear property zoning or tax lot lines. Such lot line windows require special Code-compliance review, dependent on the building type and building construction class, to determine the allowable window sizes, quantity, and fire protection needed.
Per the Zoning Resolution, a mixed building is a building used partly for residential use and partly for community facility, and/or commercial use.
Per the Building Code, a building with mixed occupancy would contain two or more occupancy classifications. Such occupancy classifications may or may not match the zoning use groups.
The amount of natural light and natural air ventilation derived from passive openings such as operable and openable windows and skylights; this may be important in some rooms located within residential buildings to ensure compliance with Code and Zoning requirements.
Any lawfully existing building or other structure which does not comply with applicable bulk regulations either on December 15, 1961 or as a result of a subsequent zoning amendment.
A non-compliance is a failure of a building or other structure to comply with any bulk regulation(s).
Per ZR 12-10, non-conforming use is any lawful use of a building that does not conform to any one or more of the applicable zoning use regulations of the district in which it is located. A non-conforming use shall result from failure to conform to the applicable district regulations on either permitted Use Groups or performance standards. Existing non-conforming use to remain per ZR 52-00.
The purpose or activity for which a building or space is used or is designed, arranged or intended to be used.
The use as defined in the Building Code, and is the purpose or activity for which a building or space is used or is designed, arranged or intended to be used
Any building or structure designed and occupied for residence purposes on a long-term basis for more than a month at a time by not more than one family as required by the Housing Maintenance Code (HMC).
Any building or structure designed and occupied for residence purposes on a long-term basis for more than a month at a time by not more than two families as required by the HMC.
Any construction that involves the removal, replacement or repair of load bearing and/or non-load bearing interior partitions, changes to structural elements (interior or exterior), facade changes, upgrades or portions thereof while maintaining the existing structure.
Changes to an existing building, including the remodeling or replacing of outdated or damaged structure and materials, and the partial demolition of interior partitions. Building renovations can also include the installation or replacement of building systems, devices or equipment, materials or parts, as part of regular maintenance of the building. Renovation projects do not impact the existing means of egress, do not change the use of the building or space, and do not increase the occupant load.
Per the Building Code, Residential Group R includes the use of a building or structure, or a portion thereof, for dwelling or sleeping purposes. If there are three or more dwelling units in the building, it shall be classified as a multiple dwelling and is subject to the MDL. Residences can be either transient, in which the occupancy of a dwelling unit or sleeping unit is not more than 30 days, or non-transient, and therefore, could include community facilities with sleeping accommodations.
Per the Zoning Resolution, Residential, as applied to building use, is a building with one or more dwelling units or rooming units, but with exceptions; for example, hotels and community facilities with sleeping accommodations are not residences per the ZR. Residential can also describe the type of zoning district; for example, hotels are not allowed in residential districts, while community facilities can be located in residential districts.
A story is a floor level in a building that is significant in both the Code and Zoning. For example, if a third story is added to a one or two family home, it could trigger additional fire protection requirements in the Code. Basements are stories, while cellars are not. An attic may be considered as a story.
The purpose for which a building, structure, or space is occupied or utilized, unless otherwise indicated by the text; Use (used) shall be construed as if followed by the words ‘or is intended, arranged, or designed to be used.’
The use as defined in the Zoning Resolution, Section ZR 12-10, and is any purpose for which a building or other structure, or an open tract of land, may be designed, arranged, intended, maintained or occupied; furthermore the use is any activity, occupation, business or operation carried on, or intended to be carried on.
Areas of land are divided into zones within which various uses are permitted.
A zoning lot is a tract of land for which specific zoning regulations apply. A zoning lot does not have to coincide with a tax lot, and can consist of one tax lot or multiple tax lots
Demolition COMING SOON!
New Buildings COMING SOON!