Design Professional Checklists: Boiler
Regardless of how the project work is portioned out, administration of the work remains the responsibility of the Registered Design Professional (RDP) who is the Applicant of Record (Applicant) in responsible charge or has verified Code and Zoning compliance of the drawings and installations for the project. Although there may be some specific projects that do not involve architectural or structural work, which may be completed by other professionals, it is important that the RDP maintain control of the entire project.
This section contains a list of tasks that provide compliance with the Construction Codes and other regulations discussed in the Project Guidelines.
Prior to Application Approval Checklist
- Provide ‘reference only’ documents of legal existing conditions. These documents will speed up the plan review process for repairs by reducing the comments and the number of back and forth checks.
- Show fire-rated walls on all architectural, mechanical, electrical, and deferred approval drawings, which will facilitate the plan review process.
- Based on the scope of work of the project, include all applicable Special/Progress Inspections and commissioning statement.
- Minimize deferred submittals to avoid construction delays.
- Although the Registered Design Professional is only required to show the final construction documents, the Applicant of Record should stamp and sign all formal submittals to the Department to demonstrate he/she has exercised responsible charge as required.
Get a printable version
Pre-Permit & On-going Project Work Checklist
Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a permit. The following may be required:
- FDNY (Letters of No Objection)
- DEP (Tap letter, meter permit, and HCPSEP)
- FDNY, DEP, and OER authorization
- Tenant/Occupant Protection Plan (only if applicable)
Post Approval Amendments:
- SRO MD Anti-Harassment checklist
If the approved work has substantive or significant changes, make sure to submit revised drawings and obtain a Post Approval Amendment (PAA).
Get a printable version
Project Completion Close-out Checklist
- As-Built Submission: If the completed project has changes that are not considered as minor and requires an As-Built submission, make sure to submit revised ‘As-Built’ drawings prior to project sign-off.
Get a printable version.
Design Professional Links