Design Professional Checklists: Curb Cut


As of August 28, 2017, it is mandatory to submit all curb cut filings in DOB NOW: Build.

Regardless of how the project work is portioned out, administration of the work remains the responsibility of the Registered Design Professional (RDP) who is the Applicant of Record (Applicant) in responsible charge or has verified Code and Zoning compliance of the drawings and installations for the project. Although there may be some specific projects that do not involve architectural or structural work, which may be completed by other professionals, it is important that the RDP maintain control of the entire project.

This section contains a list of tasks that provide compliance with the Construction Codes and other regulations discussed in the Project Guidelines.

Checklists include:


Prior to Application Approval Checklist

  • Reference Only Documents.  Provide ‘reference only’ documents of legal existing conditions. These will speed up the plan review process for work by reducing the back and forth comments and correspondence.
  • Initial Survey.  An Initial Survey that is no older than 90 days must be submitted.
  • Required Documents.  Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a permit.

Get a printable version.


Pre-Permit & On-going Project Work Checklist

Pre-Permit

Required Documents: Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a permit. The following may be required:

  • DOT Approval

On-going

Post Approval Amendments: If the approved work has substantive or significant changes, make sure to submit revised drawings and obtain a Post Approval Amendment.

Get a printable version.


Project Completion Close-out Checklist

  • As-Built Submission: If the completed project has changes that are not considered as minor and requires an ‘As-Built’ submission, make sure to submit revised ‘As-Built’ drawings prior to project sign-off.
  • Department of Transportation (DOT) Approval: Required for project sign-off  
  • Final Survey: Following completion of the project, a Final Survey showing the actual work must be submitted.
  • Final Inspection: If the applicant (RDP) intends to perform the final inspection, the professional must submit a Letter of Completion for the project.

Get a printable version.


Design Professional Links


Helpful Links